Installation
9FX Vision 330 (PCI) Graphics Option 2–5
Digital UNIX Installation
Digital UNIX V3.2d-1 (minimum version) already includes the display
driver software required by the Vision 330 graphics option.
If you have purchased a Digital AlphaServer system or a workstation that
already has the Vision 330 graphics option installed, and you choose to use
the factory-installed software, you do not need to take further action.
If you have purchased the Vision 330 graphics option as an add-on, or you
have chosen not to use the factory-installed software and you choose to do a
new Digital UNIX V3.2d-1 installation, you need to install Digital UNIX
V3.2d-1 as described in the “New Digital UNIX V3.2d-1 Installation”
section. Refer to the Digital UNIX Installation Guide for additional
information.
If you have purchased the Vision 330 graphics option as an add-on, and
your system is currently running Digital UNIX V3.2d-1, which was
upgraded to that version while a graphics option other than the Vision 330
was installed, you need to install the Vision 330 driver software. You install
the driver software from the Digital UNIX V3.2d-1 installation CD-ROM as
described in the “
Digital UNIX Upgraded to V3.2d-1 with Another Graphics Option
Installed” section.
Optionally, you can change the resolution of the graphics option as
described in the “
Changing Digital UNIX Display Characteristics” section.
_____________________ Note ______________________
When the Digital UNIX system is powered on, the Vision 330
graphics option runs in VGA text mode as a terminal device. If
a graphics option other than the Vision 330 was previously
running on the system, X/Motif cannot be started until the
operating system kernel has been reconfigured.
________________________________________________
