Installation
2–6 9FX Vision 330 (PCI) Graphics Option
New Digital UNIX V3.2d-1 Installation
Install the Vision 330 graphics option as described in the “Hardware
Installation” section and then perform the following steps:
1. Shut down your Digital UNIX system to the SRM console prompt
(>>>).
2. Insert the Digital UNIX V3.2d-1 CD-ROM into the system CD-ROM
drive unit.
3. Boot the CD-ROM that contains Digital UNIX V3.2d-1.
4. Refer to your Digital UNIX Installation Guide and complete the
V3.2d-1 installation.
Digital UNIX Upgraded to V3.2d-1 with Another
Graphics Option Installed
Install the Vision 330 graphics option as described in the “Hardware
Installation” section and then perform the following steps:
1. Insert the Digital UNIX V3.2d-1 or greater CD-ROM into the system
CD-ROM drive unit.
2. From the appropriate drive, boot the system disk file genvmunix to
single-user mode:
>>>
set boot_osflags " "
>>>
boot -file genvmunix dka0
