Installation
2–4 9FX Vision 330 (PCI) Graphics Option
Install the Vision 330 graphics option as described in the “Hardware
Installation” section and then perform the following steps:
1. From the ARC Multiboot blue screen menu, select Supplementary
Menu.
2. Select Install Windows NT from CD-ROM.
3. Within the Windows NT Workstation Setup process, the system queries
for either Express Setup or Custom Setup installation. Select C for
custom installation. If you encounter difficulty, refer to the Windows
NT installation guide for help.
4. Early in the Custom Setup process, the program queries for either a
New Version or an Upgrade. Select N for new version.
5. A list of hardware and software components is displayed. From the
menu, select the desired display.
6. Insert the Windows NT installation CD-ROM into the CD-ROM drive
unit.
7. When queried, select the S3 compatible video driver option and press
Return.
8. Press
Return again to continue, and follow the Windows NT
installation process instructions.
_____________________Note ______________________
Near the end of the first half of the Windows NT Setup process,
an automatic reboot is invoked. Setup then continues in graphics
mode. If you experience any difficulty, refer to the Windows NT
installation guide for help.
________________________________________________
9. Near the end of the last half of the Windows NT Setup process (after
the point where the system clock is set), a dialog box appears
acknowledging the presence of the Vision 330 graphics option. Click
on the OK button to proceed and then select the List all modes ...
option.
10. Set up a new default display mode as instructed in the “Changing
Windows NT Display Characteristics” section.
11. When Windows NT reboots, the new display characteristics are loaded
and the Vision 330 graphics option comes up in the selected display
mode.