46
ReefKeeper Lite User Guide
Programming
The next option will be Device and “None” will be fl ashing.
4
Press the
[Up]
button or the
[Down]
button to scroll through the available devices and
press the
[Enter]
button when the desired probe is fl ashing.
The next prompt will be for “Trip When”. Options are “Open” or “Closed”.
When the alarm is set to trip when “Open”, the alarm will be triggered when the device’s
value is Open.
When the alarm is set to trip when “Closed”, the alarm will be triggered when the device’s
value is Closed.
5
Press the
[Up]
button or the
[Down]
button to select the correct value and press
[En-
ter]
to move to the next step.
The screen will change and show “Save”.
6
Press the
[Enter]
button to save.
You can go back from a save by pressing
[Back]
when save is fl ashing.
To set an Alarm using a channel or other output device
1
From the Main Menu with Alarms fl ashing, press the
[Enter]
button.
“Alarm01” will be fl ashing.
2
Press the
[Up]
button or the
[Down]
button to scroll to the Alarm you wish to set up
and press the
[Enter]
button.
The fi rst prompt will be for “Alert” and “---” will be displayed as default. Each one of the
“-” marks indicate a diff erent type of alert that can be enabled or disable. Enabling these
values will display the letter that represents the type of the alarm. The fi rst “-” is to set the
fl ashing of the screen, the second is to set the unit to beep and the third is to set the NET
module to send an e-mail.
3
Press the
[Up]
or
[Down]
buttons to set the fi rst character, press
[Enter]
to set and
move to the next option. Continue until all options are set and press
[Enter]
to con-
fi rm.
ReefKeeper Lite User Guide
47
Programming
The next option will be Device and “None” will be fl ashing.
4
Press the
[Up]
button or the
[Down]
button to scroll through the available devices and
press the
[Enter]
button when the desired probe is fl ashing.
The next prompt will be for “Trip When”. Options are “On” or “Off ”.
When the alarm is set to trip when “On”, the alarm will be triggered when the device’s value
is On.
When the alarm is set to trip when “Off ”, the alarm will be triggered when the device’s value
is Off .
5
Press the
[Up]
button or the
[Down]
button to select the correct value and press
[En-
ter]
to move to the next step.
The screen will change and show “Save”.
6
Press the
[Enter]
button to save.
You can go back from a save by pressing
[Back]
when save is fl ashing.
Summary of Contents for ReefKeeper Lite
Page 30: ......
