background image

ReefKeeper Lite User Guide

Firmware 2.01

Copyright © 2010-2011 Dynon Instruments DBA Digital Aquatics. All rights reserving, no part of 
this manual may be reproduced, copied, transmitted, disseminated or stored in any storage me-
dium, for any purpose without the express written permission of Digital Aquatics. Digital Aquatics 
hereby grants permission to download a single copy of this manual and of any revision to this 
manual onto a hard drive or other electronic storage medium to be viewed for personal use, pro-
vided that such electronic or printed copy of this manual or revision must contain the complete 
text of this copyright notice and provided further that any unauthorized commercial distribution 
of this manual or any revision hereto is strictly prohibited.  

Information in this document is subject to change without notice.  Digital Aquatics reserves the 
right to change or improve its products and to make changes in the content without obligation 
to notify any person or organization of such changes. Visit the Digital Aquatics website (www.
DigitalAquatics.com) for current updates and supplemental information concerning the use and 
operation of this and other Digital Aquatics products.

Summary of Contents for ReefKeeper Lite































Reviews: