Laser Ally Speed LIDAR Operator Guide
6
Digital Ally, Inc.|Doc. 30157 Rev 12
Notices and Precautions
Caution: Class 1 Laser Product
The Laser Ally Speed LIDAR is a Class 1 Laser product in accordance
with U.S. 21CFR parts 1040.10 and 1040.11, which is safe for use in
all intended operation modes. However, standard precautions
should always be taken with laser products:
Avoid staring into the output aperture of the device,
Avoid directing the LIDAR at other individuals for prolonged
periods,
Do not direct the output of the LIDAR at anyone using optical
instruments such as binoculars as this will increase the risk of
eye hazard.
Caution—the use of controls or adjustments or performance
of procedures other than those specified herein may result
in hazardous radiation exposure.
Caution: Precision Instrument
Your LIDAR system is built to be durable and robust. However, like
any precision optical instrument, care should be taken to protect the
unit from drops and hard impacts. Store the unit in a cool dry place
when possible. Avoid temperature extremes beyond -30°C and 60°C.
Caution: Use Care When Cleaning Optics
Glass surfaces should be cleaned with a soft cloth or tissue and
water. Isopropyl Alcohol (rubbing alcohol) can be used if needed.
Use water and a mild soap to clean the housing if necessary. Avoid
the use of acetone (nail polish remover) or other strong cleaning
solutions as these may damage the polymer housing materials.
