Laser Ally Speed LIDAR Operator Guide
26
Digital Ally, Inc.|Doc. 30157 Rev 12
If the LIDAR does not pass the test, carefully recheck the distances,
reposition the targets and LIDAR, if necessary, and then repeat the
test. If the unit continues to fail the test, please contact customer
service.
Timed Distance Mode
The Timed Distance Mode allows the LIDAR unit to be used to
determine a vehicle’s average speed over a known distance between
two visible reference objects along the roadway.
To enter the Timed Distance Mode, press Menu
and then use
the up/down arrows
to display “Timed Distance” on
the rear display. Press Enter
. The rear panel will display:
The operator may now enter the reference distance in metres
between the two reference objects using the up/down arrows
. Alternatively, the operator may shoot the two reference
points to determine the distance to be traveled.
Note: The reference distance must be at least 60 metres.
Timed Distance
200
or
Shoot Object
