Laser Ally Speed LIDAR Operator Guide
14
Digital Ally, Inc.|Doc. 30157 Rev 12
HUD.
(Note: The rear panel low battery symbol will be partially filled
in).
The unit may continue to be used, and may last a considerable
amount of time particularly with low volume settings; however a
replacement set of batteries should be handy to avoid down time.
When the batteries reach the end of their capacity, the rear panel
will display:
The unit will then automatically countdown to turn off.
Note: Significant gains in battery life can be realized by setting the
audio and HUD brightness settings at the lowest levels required for
your environment. Even if you have received the “Battery Voltage
Critical Warning”, you may be able to restart the LIDAR and gain
usable time by switching the brightness and volume to the lowest
acceptable levels.
Jam / ECM Attempt Indication
The Laser Ally LIDAR contains sophisticated counter measures to
defeat LIDAR “Jamming” devices available in the consumer market
place, while continuing to display accurate speed-calculations. The
system also indicates when a jammer or other Electronic Counter
Measure (ECM) is detected on the target vehicle by displaying the
phrase “Jam ECM” on the rear display and flashing the “
”
symbol in the HUD. Note that extremely bright surfaces on the
Battery Voltage
Critical
Shutdown
in 5 Seconds
FT
