Laser Ally Speed LIDAR Operator Guide
Digital Ally, Inc.|Doc. 30157 Rev 12
13
2)
Obstruction Mode: Only ellipse indicator is on; minimum
range is adjusted to ignore obstruction by requiring the
obstruction to be targeted with an initial range reading, and
then verified with enter button; (see “Advanced Controls
and Modes”).
3)
Normal Mode: No indicators on; no change in minimum
range of the LIDAR.
Menu/Exit Menu
The
button is used to enter and exit the LIDAR’s Menu
system. The Menu system allows the operator to adjust certain
parameters and features as well as enter the Time/Distance mode.
(See “Advanced Controls and Modes”).
After the Menu button is pressed, the blue functions on the dual use
buttons become active. After all settings have been selected,
pressing
again will exit the menu system. The general
description of blue function buttons are as follows:
Up and Down Arrows
While in the Menu system, the
buttons are used to
navigate through the menu options, to highlight a desired item, or to
scroll through various values.
Enter Button
The
button is used to select or activate a particular menu
item or value.
Battery Voltage Indications
When the LIDAR unit’s batteries begin to run low on power, the
battery indicator will illuminate on both the rear panel display and
