Laser Ally Speed LIDAR Operator Guide
Digital Ally, Inc.|Doc. 30157 Rev 12
29
Input / Output Port
An eight-pin DIN style connector is located on the right side of the
unit. This connector can be used to collect speed and range
measurement data during operation using a special USB cable
provided by Digital Ally. Contact the manufacturer for further details
regarding use of the I/O port.
Recommended Daily Test
The Laser Ally LIDAR system is designed to provide years of service
with limited maintenance. The unit uses sophisticated digitally
locked electronics to ensure continued accuracy. However, we
recommend performing the following tests before each shift that the
operator is going to use the Laser Ally for enforcement purposes.
This will ensure operator confidence in the instrument:
Daily Recommended Test
Initiate the system Daily Test by pressing the
button. All
critical internal timing electronics and software components are
checked. In the HUD will be displayed “888.8”, the Battery indicator,
the Aiming Reticule and the Obstruct / Weather indictor. If all are
illuminated the operator must press the
button to verify. The
unit will commence a series of internal tests of the check sum,
firmware, personality, battery voltage and unit temperature.
