DVM-500 User’s Guide
Digital In-Car Video System
Digital Ally DVM User Guide Rev. F (334/1.6.2) Page
6
of
36
LED Indicators
LED indicators are used to indicate the operational status of the RMT.
LEDs are laid out left to right from the PWR button as: Red, Amber,
Green.
While Operating
Red
LED – On steady indicates that it is transmitting audio.
Amber
LED - On steady if out of range while it is transmitting audio.
The Amber LED will flash slowly when battery has 25% charge left
and will flash rapidly at 15% remaining.
Green
LED - Flashes every 3 seconds to indicate Power On Standby
mode.
Ready to Sync - All three LEDs flash quickly. Waiting for in car
transceiver to attempt sync.
During Sync - alternately flash Red and Green LEDs.
Sync Finished - All LEDs on steady for 1 second to indicate Sync
Finished, then unit will revert to Standby mode.
While Charging
Battery 25% charged -- 1 flash of the Amber LED
Battery 50% charged -- 2 flashes of the Amber LED
Battery 75% charged -- 3 flashes of the Amber LED
Battery 100% charged -- 4 flashes of the Amber LED
Important: The RMT is automatically powered down during charging. It
must be powered back on by the user after removing it from the cradle or
audio will not be recorded while the DVM is recording.
Covert Mic Mode
Covert mode disables all three LED lights on the top of the RMT.
Pressing the RECORD button quickly two times will enable Covert
Mode. Pressing the RECORD button quickly two more times will
disable Covert Mode.
Record Lock Mode
Record lock disables the PWR and RECORD buttons on the RMT so
that it remains on during recording. Record Lock Mode is enabled via
the Settings Menu (page 20) on the DVM and may require an optional
upgrade to existing DVM hardware. Please contact Digital Ally, Inc.
for more details.
MIC/
CHG
PWR
Red
Amber
Green
Remote Mic (RMT)
