DVM-500 User’s Guide
Digital In-Car Video System
Digital Ally DVM User Guide Rev. F (334/1.6.2) Page
26
of
36
Power Control Menu
Power Button Shutdown
If Power Button Shutdown is set to Enable, then the DVM can be
turned ON/OFF by pressing and holding the MARK button while in
Menu mode. If Power Button Shutdown is set to Disable, then the
MARK button will no longer turn the DVM OFF, and Ignition
Shutdown will automatically be set to Enable. The DVM will then
power down using the Ignition Shutdown feature after the user-
configured delay time has elapsed.
Important: If the Blue wire from the Interface box is not connected
to the vehicle’s ignition switch, then the DVM will act as if the
ignition switch is in the OFF position, and will power down after the
user-configured delay time has elapsed (regardless of the actual
ignition switch position).
Ignition Shutdown
If Ignition Shutdown is set to Enable, and the vehicle’s ignition switch
is turned to the OFF position, then the DVM will automatically power
down after the user-configured delay times.
Important: The Blue wire from the Interface Box should be
connected to the vehicle’s ignition switch before enabling Ignition
Shutdown. Please see the DVM-500 Installation Instructions for
more information.
(Power Control Menu options continue on the next page)
Menu Item
Settings
Default
Power Button Shutdown
Enable, Disable
Enable
Ignition Shutdown
Enable, Disable
Disable
Ign. PowerUp Option
Installed,
Uninstalled
Uninstalled
Delay in Record (mins)
1 to 240
1
Delay in Non-Record (mins)
1 to 480
1