USER’S MANUAL
50
MENU SETUP
6.3.2 RECORD PROGRAM
This feature uses predefined recording modes to create new ones according with your own
needs. This means you can create different programs using existing predefined programs.
You have available up to 10 different programs ( 0-9). These programs will be used to setup
the recording schedule on the RECORD SETUP menu. For example, you can create a
program for Motion detection or another for continuous recoding
At the RECORD menu,
Move the cursor to the RECORD PROGRAM using , buttons.
Press the ENTER button when the cursor is on the RECORD PROGRAM and the following
screen appears
Use the , , , buttons to move the
cursor to the desired item.
Select the desired value for each selected
item using the (-), (+) buttons or jog dial.
After all setting are done, exit using the
‘ESC’ key or the right-double-click of mouse.
When exiting from this menu, the DVR
compute the values under this menu. And then if
some mistakes exist out of settings it will show
the proper error message and return to this menu
again. And if ‘0’ IPS value is detected out of
setting it will show the warning message for some
seconds and exit.
VCE300
RESOLUTION
4CH
FPS/TL
FPS
per
ch ( Max)
8CH
FPS/TL
FPS
per
ch( Max)
16CH
FPS/TL
FPS
per
ch( Max)
360 x 240
CIF 120
30
CIF 120
15
CIF 120
7.5
720 x 240
D1/2 60
15
D1/2 60
7.5
D1/2 60
3.75
720 x 480
D1 30
7.5
D1 30
3.75
D1 30
1.875
[4CH DVR]
[8CH DVR]
[16CH DVR]
