USER’S MANUAL
104
11.8.3 PTZ
:
This menu allows you to control the PTZ camera through the network.
Click the “PTZ” button to display the following PTZ controller..
Click the
and
button to tilt up or down.
Click the
and
button to pan left or right.
Click the “ZOOM(
-
or +)” button to zoom in or out.
Click the “FOCUS(
-
or +)”
button to obtain the clearest picture.
And then select the speed.
• Preset
setup
: A preset is user-defined camera position using pan and tilt, zoom, and focus commands. The DVR
has programming capacity for 16 preset locations.
•
Program a preset
Move the camera to a desired position using the PTZ control buttons.
After setting the PTZ camera, click one of the desired “Set” buttons, 1~16 of Preset.
To continue setting the preset camera, click another “Set”
button after
○
1
. (Repeat
○
1
and
○
2
)
•
Move to a preset
Click one of the “Move” buttons to move to the desired setting.
The camera will move to the programmed preset position.
NOTE
You can enter the PTZ mode only while connecting the PTZ camera.
