USER’S MANUAL
22
OPERATION
5.2.3 RECORD
Press the REC button and the following message will be displayed as below;
MANUAL MODE
Press the REC button to begin recording.
To stop recording, press the REC button again. The screen will be turned into real time display
mode.
SCHEDULE MODE
When Schedule mode is selected, the recording will be automatically executed according to the
recording schedule. (Please refer to the SCHEDULE SETUP in the RECORD setup.)
The color of record indication (
NNNNNNNN )
on the screen will be changed according to the type of
recording and refer to the following.
- “
N
” : Manual recording status.
- “
S
” : Schedule recording status.
- “
E
” : Event recording status. (Motion detection/ Video loss/ Sensor)
- “ -
” : Not recording.
All channels will be displayed by “E” even if an event happened just on one channel.
“E” will be displayed because this unit enters the event record mode when event happened.
If a channel has an event, all channels will be recorded by event recording frame rate to be set
in RECORD PROGRAM menu.
