11
2. Clean the holes, removing any debris from drilling.
3. Place the external part of the bolts in the holes. Leave about 25mm of the bolt out of
the hole.
4. Position the column and fasten it to the floor with the four screws that accompany
the bolts. Use a flex-head socket wrench with ¾'' or an articulated socket wrench.
5.4 Assembling arms and covers
After drilling the floor and assembling the column, it is possible to assemble the arms
and plastic covers.
The image below shows the specific parts of
arms and upper frontal
CATRAX Plus's
cover with assembling instructions.
plus
TIP:
- As an optional item, Digicon can provide a steel template for the fixation of
CATRAX Plus, containing the exact demarcations of the necessary holes.
-TIP: We recommend the bolts by the brand Tecnart, model AF38110,
3/8x4''.
ATTENTION:
in the central slot, destined to the passage of cables, it is
necessary to measure the cables according to the opening's size.
Arm
Screw M3x16
Screw M3x8
Fiat washer M3
Screws access
cover
Screw
Allen M6x20
Upper plastic cover
Lock washer M6
