AT commands
Secure Session commands
Digi XBee® 3 802.15.4 RF Module User Guide
183
Parameter range
0 - 0x1F (up to 0xFFFF)
Bit field
Unused bits must be set to
0
. These bits may be logically OR'ed together:
Bit Meaning
0
Reserved
1
Remote AT Commands
When set to
1
and if a password has been set, the device will not respond to insecure Remote
AT Command requests (API Frame
) but still can send insecure Remote AT Commands.
2
Serial Data
When set to
1
, the device will not emit any serial data that was sent insecurely.
This functionality applies to devices that are configured for Transparent mode, but in this
instance, only the SRP server would be
AP
=
0
, the client would still have to send the
via API mode. The server will also not emit any 0x90 or 0x91
frames when this bit is set.
Note
On 802.15.4 insecure 0x80 frames will also not be emitted.
Default
0
