AT commands
Coordinator/End Device configuration commands
Digi XBee® 3 802.15.4 RF Module User Guide
135
Bit Meaning
Setting Description
0
Allow Pan ID
reassignment
0
Coordinator will not perform Active Scan to locate available PAN ID. It
operates on ID (PAN ID).
1
Coordinator performs an Active Scan to determine an available
ID
(PAN ID). If a PAN ID conflict is found, the
ID
parameter will change.
1
Allow
Channel
reassignment
0
Coordinator will not perform Energy Scan to determine free channel.
It operates on the channel determined by the
CH
parameter.
1
Coordinator performs an Energy Scan to find the quietest channel out
of the channels to be scanned determined by the
SC
parameter. The
Coordinator then operates on that channel.
2
Allow
Association
0
Coordinator will not allow any devices to associate to it.
1
Coordinator allows devices to associate to it.
3 -
7
Reserved
Default
0
SC (Scan Channels)
Sets or displays the list of channels to scan for all Active and Energy Scans as a bit field. This affects
scans initiated in
and
commands in Command mode and during
End Device Association and Coordinator startup.
Parameter range
1 - 0xFFFF (bit field)
Note
A parameter of
0
automatically scans the current channel configured by
CH
.
Bit field mask:
Bit
IEEE 802.15.4 channel
0
Channel 11 (0x0B)
1
Channel 12 (0x0C)
2
Channel 13 (0x0D)
3
Channel 14 (0x0E)
4
Channel 15 (0x0F)
5
Channel 16 (0x10)
6
Channel 17 (0x11)
