Digi XBee 3 802.15.4, User Manual

Page: 180 / 264

AT commands BLE commands
Digi XBee® 3 802.15.4 RF Module User Guide 180
Does not exit out of Command mode.
Parameter range
N/A
Default
N/A
BLE commands
The following AT commands are BLE commands.
BL (Bluetooth MAC Address)
BL reports the EUI-48 Bluetooth device address. Due to standard XBee AT Command processing,
leading zeroes are not included in the response when in Command mode.
Parameter range
N/A
Default
N/A
BT (Bluetooth Enable)
BT enables or disables the Bluetooth functionality.
Note When Bluetooth is enabled, the XBee 3 802.15.4 RF Module cannot be in Sleep mode. If the
device is configured to allow Sleep mode and you enable Bluetooth, the XBee 3 802.15.4 RF Module
will not enter sleep.
Parameter range
Bit Description
0 Bluetooth functionality is disabled.
1 Bluetooth functionality is enabled.
Default
0
$S (SRP Salt)
Note You should only use this command if you have already configured a password on the XBee device
and the salt corresponds to the password.
The Secure Remote Password (SRP) Salt is a 32-bit number used to create an encrypted password for
the XBee 3 802.15.4 RF Module. Use the
$S command in conjunction with the $V , $W , $X , and $Y