Digi XBee 3 802.15.4, User Manual

Page: 7 / 264

Digi XBee® 3 802.15.4 RF Module User Guide 7
Example: Command mode 96
Example: Local AT command in API mode 97
Example: Remote AT command in API mode 97
Periodic I/O sampling 98
Source 98
Destination 99
Multiple samples per packet 99
Example: Remote AT command in API mode 99
Digital I/O change detection 100
I/O line passing 101
Digital line passing 101
Example: Digital line passing 102
Analog line passing 102
Example: Analog line passing 102
Output sample data 103
Output control 103
I/O behavior during sleep 103
Digital I/O lines 103
Analog and PWM I/O Lines 104
Networking
Networking terms 106
MAC Mode configuration 106
Clear Channel Assessment (CCA) 107
CCA operations 107
Retries configuration 107
Transmit status based on MAC mode and XBee retries configurations 108
Addressing 109
Send packets to a specific device in Transparent API mode 109
Addressing modes 109
Peer-to-peer networks 110
Master/slave networks 110
End device association 110
Coordinator association 111
Association indicators 112
Modem status messages 112
Association indicator status codes 113
Direct and indirect transmission 113
Configure an indirect messaging coordinator 114
Send indirect messages 114
Receive indirect messages 114
Encryption 115
Maximum payload 116
Maximum payload rules 116
Maximum payload summary tables 117
Work with Legacy devices 118
Network commissioning and diagnostics
Remote configuration commands 120
Send a remote command 120
Apply changes on remote devices 120
Remote command responses 120