Configure and manage the device using the ConnectPort LTS
command line interface
Management through the command line
interface
Digi ConnectPort LTS User Guide
137
set alarm
Use the
set alarm
command to display alarm settings, including conditions that trigger alarms, and
how alarms are sent. You can configure alarms to be sent as either an email message, an SNMP trap,
or both. You can configure the alarms as needed.
set autoconnect
Use the
set autoconnect
command to configure the autoconnection behaviors for serial port
connections.
set buffer and display buffers
Use the
set buffer
command to configure buffering parameters on a port and display the current port
buffer configuration. The
display buffers
command displays the contents of a port buffer, or
transfers the port-buffer contents to a server running Trivial File Transfer Protocol (TFTP).
set group
Use the
set group
command to configure create, establish, update, or remove group attributes.
set host
Use the
set host
command to configure the host name for the Digi device.
set ippool
Use the
IP pool
command to configure the IP pool for the PPP connection.
set lcd
Use the
set lcd
command to configure the LCD.
set modem
Use the
set modem
command to configure the modem profile.
set network
Use the
set network
command to configure the network options.
set nfs
Use the
set nfs
command to configure NFS.
set permissions
Use the
set permissions
command to configure the user permissions for various services and
command-line interface commands.
