Configure and manage the device using the ConnectPort LTS
command line interface
Management through the command line
interface
Digi ConnectPort LTS User Guide
136
n
Serial statistics. The
info serial
command displays the following information:
l
Number of bytes received and transmitted
l
Signal changes
l
FIFO and buffer overruns
l
Framing and parity errors
l
Breaks detected
n
TCP statistics. The
info tcp
command displays the following information:
l
The number of segments received or sent
l
The number of active and passive opens
l
The number of bad segments received
l
The number of failed connection attempts
l
The number of segments retransmitted
l
The number of established connections that were reset
n
UDP statistics. The
info udp
command displays the following information:
l
The number of datagrams received or sent
l
The number of bad datagrams received
l
The number of received datagrams that were discarded because the specified port was
invalid
n
ZigBee statistics. The
info zigbee_sockets
command displays the following information:
l
The number of frames received or sent
l
The number of bad frames received or sent
l
The number of bytes received or sent
l
The number of received bytes dropped or truncated
newpass
Use the
newpass
command to issue a new password to a user.
reconnect
Use the
reconnect
command to reestablish a connection opened by a
connect
,
rlogin
, or
telnet
command. By default, the
reconnect
command reestablishes the connection to the last active
session.
rlogin
Use the
rlogin
command to sign in to a remote system.
send
Use the
send
command to send a telnet control command, such as break, abort output, are you there,
escape, or interrupt process, to the last active telnet session.
