Digi 70002405 User Manual Download

Page: 111 / 163

Configure the device using the ConnectPort LTS web interface

Applications pages

Digi ConnectPort LTS User Guide

111

Peer Configuration

: Specifies how to assign the remote IP address that is supplied to the

client.

Automatically assign remote IP address from IP address pool

: Automatically assigns

the remote IP address with a unique address from the IP address pool (as configured in

Basic PPP Settings

). The assigned address will not conflict with any other PPP connection

using the Dynamic IP Address Pool.

Note

The Dynamic IP Address Pool must be enabled.

Allow remote peer to specify remote IP address

: The remote peer automatically assigns

the remote IP address.

Assign static remote IP address

: Assigns the IP address entered in the

Remote IP

Address

field to the remote IP address. This connection will always be assigned this same

IP address. Use this option if the client needs to have the same IP address if it is running as

a server.

Remote IP Address

: Specifies the static remote IP address.

Allow client access to local network via PPP connection

: Specifies whether the remote

client should have access to the local Ethernet network when they dial in to the PPP

connection. This option requires the ConnectPort LTS device to have a unique local IP

address for each PPP connection to handle the routing between the PPP connection and

the local network.

Automatically assign local IP address from IP address pool

: Automatically assigns the

local IP address with a unique address from the IP address pool (as configured in

Basic PPP

Settings

). The assigned address will not conflict with any other PPP connection using the

Dynamic IP Address Pool.

Note

The Dynamic IP Address Pool must be enabled.

Assign static local IP address

: Assigns the IP address entered in the

Local IP

Address

field to the local IP address. This connection will always be assigned this same IP

address. Use this option if the client needs to have the same IP address if it is running as a

server.

Local IP Address

: Specifies the local IP address to use for the PPP connection. This IP

address must be unique on the network and must not be the same as the remote IP

address or any address in the Dynamic IP Address Pool. Digi recommends that this address

should reside on a different subnet than the Ethernet IP address.

Summary of Contents for 70002405




































































































































































Search results

Summary of Contents for 70002405

Reviews:

Related manuals for 70002405

Brands by name

Popular brands

Digi 70002405, User Manual

Search results

Summary of Contents for 70002405

Reviews:

Related manuals for 70002405

Brands by name

Popular brands