Configure the device using the ConnectPort LTS web interface
Applications pages
Digi ConnectPort LTS User Guide
109
f. In the
Peer Configuration
section, select
Allow client access to local network
via PPP connection
if you want the incoming PPP client to be able to access the
ConnectPort LTS or other devices on the network through the ConnectPort LTS
PPP interface. Once you enable this option, you can select one of the following
options for assigning the IP address of the local PPP interface:
Automatically assign local IP address from IP address pool
: The
IP address for the local PPP interface is automatically assigned from
the IP address pool set on the Basic PPP Settings page.
Assign static local IP address
: The IP address for the local PPP
interface is assigned as specified by the local IP address.
g. In the
Advanced Configuration
section, select
Enable idle timeout
if you want to
close the PPP connection when there is no activity from the incoming PPP client
during the time specified by Timeout.
7.
Advanced PPP Settings
: If you want the incoming PPP client to be able to access the local
network where the ConnectPort LTS is connected, select the
Process ARP Requests (Proxy
ARP)
option.
Note
Use
Advanced PPP Settings
when IP addresses assigned to the PPP link are on the
same local network subnet as the local LAN.
Incoming PPP Connections
Incoming PPP connections are connections where you can dial in to the ConnectPort LTS device. You
can connect to the ConnectPort LTS device using a modem to dial the phone number of the modem
connected to the serial port. For example, you can use a modem to access the network associated
with the Digi device server or use modems to create a network bridge by connecting two separate
networks.
See
Configure incoming PPP connections
for more information.
n
Serial ports
: Select the serial ports or internal modem associated with incoming PPP
connections.
