DIEBOLD NIXDORF BEETLE/M-III, Operator'S Manual

Page: 25 / 74

Connecting orifice plate
The display interface of the BEETLE system has an RMT function. This function is utilized by actuating
the ON/OFF button on the screen. This function is available only if the BA8x/BA9x display has been con-
nected to a BEETLE system using a PLINK2™ interface cable. The mode of operation depends not only
on the settings of the BEETLE BIOS but also on the display settings. Details can be obtained from the
following table.
BEETLE
BIOS
Settings BA8x/BA9x
Settings
BEETLE System and
Display status Reaction after pressing the display power-on button
RMT
enabled/
Wake on
PLINK
RMT
enabled OFF The system boots up. The display is switched on by
the system.
ON The system shuts down; the display switches off once
the system itself has been switched off completely.
RMT
disabled OFF The system begins with the boot process; the display
is switched on by the system.
ON FW2.10 and higher: The system does not react; the
display switches off.
FW2.05: The system switches itself off; the display re-
mains switched on.
RMT
disabled/
Wake on
PLINK
RMT
enabled OFF The system does not react. The display remains off.
ON The system does not react; the display remains on.
RMT
disabled OFF The system does not react; the display remains off.
ON The system does not react; the display remains off
The function (RMT) makes it possible for you to switch on the BEETLE system which is currently in
Standby or Hibernation mode. It is also possible to move the system from switched-on status into
Standby or Hibernation mode. The settings in the operating system determine which mode is active
thereby.
9.2.4
9.2.4 Mini D-Sub socket (VGA)
The VGA interface is used for connecting a high-resolution display to the BEETLE system. The display is
connected to the system via this 15-pin D-Sub socket.
9.2.5
9.2.5 Mini-DIN (KYBD, keyboard)
The BEETLE /M-III has a 6-pin mini DIN socket for the connection of a keyboard.
NOTE
Please ensure that the plug has a tight contact with the socket because otherwise it can
lead to erroneous functions.
01750341829F 9-5