External view
8.2
8.2
Light emitting diodes
The light emitting diodes at the front of the system are marked as follows:
HDD/SSD
Right LED flashes yellow
Read or write access on HDD/SSD
POWER
Left LED lights orange
Standby mode (S4/S5)
Left LED lights green
Device is switched on (S0)
Left LED flashes green
Standby (S3)
For BEETLE /M-III with an M1/M2 motherboard, the following applies:
POWER ON flashes briefly 4 x
After a pause
100 ms on / 900 ms off
100 ms on / 900 ms off
100 ms on / 900 ms off
100 ms on / 4750 ms off
POWER ON flashes briefly 2 x
After a pause
100 ms on / 100 ms off
100 ms on / 700 ms off
Error in the power supply
Error in the CPU power supply, in the CPU or in
the BIOS
For BEETLE /M-III with an R1/R2 motherboard, the following applies:
2 Hz -> 500 ms
1 Hz -> 1000 ms
0.25 Hz -> 4000 ms
0.125 Hz -> 8000 ms
0.0625 Hz -> 16000 ms
Drive low
RAM error
CPU error
Chip set initialization error
UEFI/NVRAM GFX error
CPU temperature too high
Fan speed greater than 400 rpm
Disabled
01750341829F
8-2
Summary of Contents for BEETLE/M-III
Page 16: ...Before switching on Press this forward so that the cable cover closes flat 01750341829F 6 5...
Page 34: ...Removing the housing cover Lift off the cover upwards Set it aside 01750341829F 12 2...
Page 45: ...Storage Media 01750341829F 13 11...
Page 61: ...Accumulator optional The UPS monitor opens 01750341829F 18 9...