7
7
Cabling the BEETLE /M-III
All devices that are part of the BEETLE /M-III modular POS system and that have their own dedicated
mains voltage cable must be connected to the same electric circuit.
CAUTION
Never plug in data or power supply cables when the system is switched on!
•
Please ensure that all data cables are plugged in at the system unit and that the peripherals are
plugged in.
•
Plug the power cable into the socket on the rear of the device.
•
Now insert the other cable end into the protective contact electrical socket s of the facility installation.
1
On/Off switch
2
Power supply
•
To switch the device on, briefly switch the On/Off button at the front. Switching off during operation is
possible; to accomplish this, press the button for approx. 5 seconds.
7.1
7.1
Basic setting
The BEETLE /M-III is configured in accordance with your order when it leaves the factory. Additional de-
vices such as scanners must be adapted to your configuration afterwards. For this, contact your respon-
sible Diebold Nixdorf branch office.
01750341829F
7-1
Summary of Contents for BEETLE/M-III
Page 16: ...Before switching on Press this forward so that the cable cover closes flat 01750341829F 6 5...
Page 34: ...Removing the housing cover Lift off the cover upwards Set it aside 01750341829F 12 2...
Page 45: ...Storage Media 01750341829F 13 11...
Page 61: ...Accumulator optional The UPS monitor opens 01750341829F 18 9...
