Connecting orifice plate
BEETLE /M-III connecting orifice plate with an O1-Motherboard:
9.2.1
9.2.1
COM2*-COM4*
Scanners, customer displays or operator displays that do not have a dedicated power supply are con-
nected to these ports.
A 9-pin D sub-socket is used for this purpose.
NOTE
Take care to ensure that the plug for the peripheral devices is tightly screw-connected with
the socket, because otherwise malfunctions could occur. The power supply is provided
through this socket.
9.2.2
9.2.2
D-Sub Plug (COM1)
Connect for example a scale with dedicated power supply to the COM1 interface. COM1 is designed as
a 9-pin D-sub plug. If you connect scales to the BEETLE /M-III which are not supplied by DN, then you
must acquire a DN license for the driver software!
NOTE
Take care to ensure that the plug is tightly screw-connected with the socket because oth-
erwise erroneous functions could occur.
9.2.3
9.2.3
Display 1 and Display 2
This interface is used for connecting a high-resolution monitor to the BEETLE system. It can be used as
DVI-D or as PanelLink 2.0 interface. Here video signals with a maximum resolution of 1920×1200 pixels
can be transferred at 60 Hz.
PanelLink 2.0 is supported by specific DN-Displays and supplies video signals and power supply in only
one cable.
01750341829F
9-4
Summary of Contents for BEETLE/M-III
Page 16: ...Before switching on Press this forward so that the cable cover closes flat 01750341829F 6 5...
Page 34: ...Removing the housing cover Lift off the cover upwards Set it aside 01750341829F 12 2...
Page 45: ...Storage Media 01750341829F 13 11...
Page 61: ...Accumulator optional The UPS monitor opens 01750341829F 18 9...
