Diamond SmartLyte, Service Manual

Page: 74 / 81

8 Interface Specifications
ECO 9085 SOP05-5038F Rev.05 Effective Date: 12/06/18 Page 74 of 81
Correlation Flag
Correlation Type Flag Code
Default D
User Correlation U
MGL Correlation (for
Ca)
M
Flame Correlation F
Error Flag
Correlation Type Flag Code
MV Range Error V
Noise Error N
Drift Error D
Range Low L
Range High H
Too Low <
Too High >
Not Calibrated X
Not Consistent !
Cannot Measure @
Li Cannot Measure M
Reading 1 mV Sign
This character represents if value is positive or negative. “+” represents positive and “-” negative
numbers. During calibration, this represents STD-A. During sample analysis, it represents
Sample mV.
Reading 1 mV Value
Ion concentration value is sent out in 7 Digits. This number is 1000 times the concentration
determined in the analysis. For example, 01234560 represent value of 1234.56. During
calibration, this represents STD-A. During sample analysis, it represents Sample mV.
Reading 1 mV Try Count (
Valid only for SMARTLYTE Calibration
)
The number represents number of tries instrument ran the standard fluid before producing stable
results. During calibration, this represents STD-A.
Reading 2 mV Sign
This character represents if value is positive or negative. “+” represents positive and “-” negative
numbers. During calibration, this represents STD-B. During sample analysis, it represents
Standard Fluid mV.
Reading 2 mV Value
Ion concentration value is sent out in 7 Digits. This number is 1000 times the concentration
determined in the analysis. For example, 01234560 represent value of 1234.56. During
calibration, this represents STD-B. During sample analysis, it represents Standard Fluid mV.