Diamond Atomix DH Series, User Manual

Page: 5 / 43

4
0.0 PREFACE
This manual is directed towards those who install, operate and maintain the machine so that they can take
advantage of the characteristics of the product in the best way. It is important that this manual is kept and
remains with the machine if it is moved or if ownership changes so that it can be consulted under all
circumstances and therefore the necessary information is available to operate it within safe conditions.
The manufacturer does not take upon themselves the obligation to give notice of possible successive
modifications of the product. Furthermore, under the terms of law, this document remains the property of
the manufacturer, and tampering, reproduction or transmission to a third party are prohibited without
their consent.
The following symbols are used to better stress some passages
ATTENTION: indicates hazards that might cause serious damages; attention is required
INFORMATIONS: indicate particularly important technical information
1 GENERAL INFORMATIONS
1.1 WARRANTLY
The duration of the guarantee is for two years and runs from the date on the invoice or tax receipt was
issued at the time of purchase. Within this period, components that have been unequivocally ascertained
to be faulty due to manufacturing defects will be substituted or repaired freely by the manufacturer from
their premises, except for electrical components and those subject to wear and tear. The guarantee
excludes postage and labor costs.
The guarantee is forfeited in the case of the damage being caused by: transportation, wrong or insufficient
maintenance, unskilled operators, tampering, repairs carried out by unauthorised personnel, or failure to
comply with the instructions of the manual. Compensation from the manufacturer will not be given for
direct or indirect damages arising during any time the machine is inoperative due to its breakdown, it being
awaiting repairs, or in any way referable to the non- physical presence of the machine.
1.2 MACHINE SPECIFICATIONS
The machine has been built and designed for professional use in the bakery and pastry industry.
The machine (Fig.1) consists of:

A robust, painted steel body powder coated with epoxy-powders for foodstuffs (reinforced with
metal profiles where the mechanical stress is greater) which contains and supports the various
machine components.

The bowl, the spiral, the central dough breaker and the protection grate are all in stainless steel.

Chain drive with oil bath gear motor.

The moving parts are on ball bearing.

Type feet (for models TS5 and TS 8), set of wheels (for models from TS 12 to TS 44),

Available with motor:
-
single-phase 1 speed
-
three-phase 1 speed