Diamond Products CC7574DKV, Operator'S Manual

Page: 29 / 72

CC7574DKV OPERATOR’S MANUAL
Zero the Blade
Ensure that the saw is operating and all safety precautions are being followed.
1. Lower the saw blade to just above the cutting surface.
2. Press the second function key on the right twice until the top right hand gauge on the display
shows 0.00 in.
The blade is now zeroed. When the blade is lowered into the cut, the gauge will increase
incrementally in the selected units (inches or millimeters) to show the depth of the cut.
Set the Blade Depth Stop
Ensure that the saw is operating and all safety precautions are being followed.
1. Follow the “Zero the Blade” procedure listed above.
2. Lower the blade into the cut to the desired depth.
3. Press the function key farthest right on the display panel twice until “Depth Stop Active”
appears at the bottom of the display screen and the depth setting appears on the lower right
hand gauge.
Deactivate the Blade Depth Stop Setting
To deactivate the “Blade Depth Stop” setting, press the function key farthest right twice until the
lower right hand gauge shows 0.00.
29