Dhollandia DH-AI02.04.01, Installation Manual

Page: 29 / 45

28
DHOLLANDIA
8.5.3 Drilling the holes for the mounting bolts

See section 8.6 on page 31 for drilling guidelines.

The position of the drill holes can be verified by using the template.
8.5.4 Fixation

Bolt the ramp fixations and the base plate to the vehicle floor by means of the bolts and nuts provided in the kit. Fasten the
bolts and nuts with the required torque. See torque values in appendix 11.2 on page 42.
NOTICE

It is essential that bolts and nuts used to mount the lift frame to the vehicle chassis, are fastened with the
required torque by means of a proper torque wrench. See appendix 11.2 on page 42.

If you use mounting bolts not supplied by DHOLLANDIA, obtain confirmation of the required torque from your
supplier and make sure they guarantee at least an equivalent strength.

Check and retighten the bolts after the static and dynamic weight test performed during the PDI test.
1 Bolt M10
2 Ramp fixation bracket
3 Vehicle floor
4 Large washer
5 Locking nut
1
2
3
4
5