Dhollandia DH-AI02.04.01, Installation Manual

Page: 9 / 45

8
DHOLLANDIA
8 Rollers [DH-AI12]: rollers mounted at the outboard edge of the flip-over point, helping the operator to unfold and fold the
ramp.
9 Handles: mounted at the side edges of the platform, used to grab the platform while unfolding and folding the ramp.
The use of the handles is mandatory! They prevent that the operator can crush his / her fingers or hands between the
folding platform sections.
10 Turn s bar [OAF820.L]: holds the platform during the pivoting motion.
11 Middle gas cylinder: standard on DH-AI13, optional [OAP825] on DH-AI12 to induce a fully automatic deployment in case
of emergency.
12 Platform lock: mechanical lock at the side of the platform.
[DH-AI13]
 locking the flip-over point [3c] in travel position.
[DH-AI02]  keeps the platform main section and the foldable point together.
13 Support rubber: rubber buffers on which the platform rests in travel position, absorbing vibrations and mechanical driving
noises [DH-AI12 / AI13].
On demountable ramps DH-AI02, support rubbers are used as feet to rest the ramp frame on the vehicle floor.
14 Side supports [DH-AI02]: protect the ramp when placed on its side.
DH-AI Fixed frame ● TERMINOLOGY
DH-AI Pivoting frame option OAF820.L ● TERMINOLOGY