Dhollandia DH-AI02.04.01, Installation Manual

Page: 34 / 45

33
DHOLLANDIA
8.8 DOOR PROTECTION RUBBER

The ramp is equipped with a door protection rubber, providing additional support to absorb small movements and vibrations.

Close the door of the vehicle. Position the rubber so that it rests against a stronger structural element of the door, not visible
from the outside.

The door protection rubber can be slid in / out, moved up / down and rotated slightly.

Loosen the bolts and move the door protection rubber to a suitable location.

In some cases the desired position can’t be reached without taking out the handles.
-
Take out the orange caps at the end of the aluminum side profile of the platform.
- Loosen the bolts of the handles and the door protection rubber, so that you can just slide these parts up / down. But don’t
take out the bolts completely as this will make it harder to place everything back.
- Slide out the parts and place them back in the desired order.
- Fasten all bolts with the required torque. See appendix 11.2 on page 42.