Dhollandia DH-AI02.04.01, Installation Manual

Page: 28 / 45

27
DHOLLANDIA

Observe a minimum distance of 35 mm between the ramp frame and the vehicle body when the platform is swung outboard.

If it is desired that the platform can be swung inboard, verify if there is sufficient clearance to swing the platform inboard from
its default position across the door aperture to the longitudinal position alongside the side panel of the vehicle body (wheel
boxes, internal racking or seating, other equipment, etc.)
Out: 93° In: 90°

Mark the position of the drill holes through the base plate and the ramp fixations.

Take the ramp and/or base plate out of the vehicle or place it further inside the vehicle to have an clear environment to perform
the drilling.
* = * =
Min. 35mm
Min. 35mm