Dhollandia DH-AI02.04.01, Installation Manual

Page: 42 / 45

41
DHOLLANDIA
OTHER frequently used signs Signs for the electric / hydraulic functions
Yes do this way. Correct work procedure. OPEN the platform, or TILT DOWN.
No, DO NOT do this way. -Incorrect work
procedure.
LOWER the platform.
Position the load at the applicable center of
maximum load. Follow the load instructions.
LIFT the platform.
Tail lift with mechanical auto-tilt at ground level
(and auto-tilt swing brackets).
CLOSE the platform, or TILT UP.
Tail lift with hydraulic auto-tilt at ground level
(and hydraulic memory cylinder)
SLIDE OUT the platform.
Unlock.
Disengage the mechanical locking system.
SLIDE IN the platform.
Lock.
Engage the mechanical locking system.
Push the stabilising LEGS DOWN.
Switch ON the electrical power. Pull the stabilising LEGS UP.
Switch ON the electrical power to the tail lift via
the main battery disconnect switch and / or
cabin switch.
Lower the hydraulic RAMP DOWN.
Switch OFF the electrical power. Raise the hydraulic RAMP UP
Switch OFF the electrical power to the tail lift
via the main battery disconnect switch and / or
cabin switch.
Switch between external and internal controls.
This is an operation to be executed manually
(as opposed to an electrical function controlled
by means of one of the control units).