PPCH-G™ OPERATION AND MAINTENANCE MANUAL
© 2007 DH Instruments, a Fluke Company
Page 92
VENT
Read, execute or abort a vent process.
VER
Read the PPCH-G software version.
ZOFFSET
n
Read or set the AutoZ offset for Hi or Lo RPT.
ZOFFSET:
XX
Read or set the AutoZ offset for Hi or Lo RPT (obsolete format)
4.4.2
ERROR MESSAGES
Table 18.
Error #s and descriptions
REPLY
DESCRIPTION
ERR# 0
“OK”
ERR# 2
“Text argument is too long”
ERR# 3
“Arguments cannot be 0”
ERR# 4
“External device not detected”
ERR# 5
“External device improperly configured”
ERR# 6
“Numeric argument missing or out of range”
ERR# 7
“Missing or improper command argument(s)”
ERR# 8
“External device time-out error”
ERR# 9
“Unknown command”
ERR# 10
“Missing or invalid command suffix”
ERR# 11
“Command missing argument”
ERR# 12
“System overpressured” or “overpressure may result”
ERR# 13
“Text queue overflow”
ERR# 14
“User unit not defined”
ERR# 16
“Generation failure”
ERR# 18
“Command not yet available”
ERR# 19
“Not available with absolute units”
ERR# 20
“Not available with gauge device”
ERR# 21
“User device not defined”
ERR# 22
“Pressure is not stable”
ERR# 23
“Option not available or installed”
ERR# 24
“Unit must be vented”
ERR# 25
“Transducer out of calibration”
ERR# 26
“COM port failed to initialize”
ERR# 27
“Internal device failure”
ERR# 28
“Device failure”
ERR# 29
“Device not available”
ERR# 30
“Must be on range IH”
ERR# 31
“Limit(s) Exceeded ”
ERR# 32
“Not stable enough”
ERR# 37
“Data table is full”
ERR# 38
“Selected range is not available”
ERR# 39
“Data verify error”
ERR# 43
“Incorrect mode”
ERR# 45
“Argument not allowed”
ERR #46
“Argument cannot be negative”
ERR #52
“Command obsolete”
ERR #53
“Not Available”
ERR# 54
“Not ready”
