Spe
cific
atio
ns
66
App
endi
x
List of specifications
DWX-53DC
Processable material *1
Ceramics for Dental
Cutting Process Resin
Materials for Dental
Cutting Process
Dental casting wax
Dental non-casting cobalt-chromium alloy (before sintering)
(zirconia, wax, PMMA, hybrid ridine, PEEK, CoCr synth metal, glass fiber reinforced
resin, PEKK, gypsum)
Mountable material geometry
Disc (stepped)
workpiece
Step Diameter 98.5 mm, Height 10±0.3
mm Body Diameter 95 mm, Height
Max 35 mm
Pinned material
Pin diameter 6 mm
Mountable material weight
850 g or less
Mountable adapter
6 Piece
Operating speed
XY:
～
3,000 mm/min
、
Z:
～
2,700 mm/min
Spindle motors
Brushless DC motor
Spindle revolution speed
6,000
～
30,000 rpm
Rotational Axis Travel
A:± 360° B:± 35°
Milling bar capacity
15 Book
Mountable milling bar
Shank diameter: 4 mm dia., Length: 40 to 55 mm
Adaptive compressed air
0.4 MPa
Interface
USB
Control Commands
RML-1, NC-cord
Power Supply Conditions
100-240 VAC ± 10%, 50/60 Hz (Overvoltage category: Category II, IEC60664-1), 2.8 A
Power consumption
Approx. 250 W
Operation sound
Operating: 70 dB (A) or less (when
not cutting) Standby: 45 dB (A) or
less
External Dimensions
W×D×H :650 × 763 × 831 mm
Weight
120 kg
Installation Environment
Indoor use, altitude: 2000 m or less
Temperature: 5 to 40 °C, Humidity: 35 to 80% (non-
condensing) Environmental Pollution Degree: 2
(depending on IEC60664-1)
Short-term short-term overvoltage: 1440 V, Long-term short-term overvoltage: 490 V
Accessories
Power Cord, Power Plug Adapter, USB Cable, Safety Precautions, Quick Access Guide,
Detection Pin, Automatic Correction Tool, Torque Driver, T-Type Six Sumi Screwdriver, L-
Type Six Sumi Wrench, Collet Mounting and Dismounting Jig, Milling Bar Holder, Milling
Bar Positioning Jig, Regulator, Bar Code Label, Standard Adapter, Open Edge Adapter,
Adapter Rack, Adapter for Pin Material, Milling Bar, Tablet Holder, etc.
*1 Depending on the specifications and physical properties, some of the listed materials may not be machinable. For more information, contact your dealer or
our call center.
Summary of Contents for DWX-53DC
