Before starting
work
56
Insta
llatio
n
NOTE
Store the automatic correction tool () so that the surface shown in the figure below is at the top.
4.
Remove the detection pin and the automatic correction tool.
When the correction value is completed, remove the detection pin and the jig for automatic correction, clean them, and then
store them.
Procedure
1.
Open the tool area cover and adapter area cover.
2.
Remove the detection pin.
3.
Remove the automatic correction tool.
Pull out the automatic correction tool slowly. Take care not to hit your hand or other objects inside the
adaptor area when pulling it out.
4.
Store the detection pin and automatic correction tool in the bottom storage.
Summary of Contents for DWX-53DC
