Install the
aircraft
25
Insta
llatio
n
Warning
Do not supply compressed air until the air hose is securely connected.
Otherwise, an unexpected accident may occur.
Important
0.6 Attach and tighten the N•m red sleeve to the torque screwdriver.
Install the regulator
Necessary items
Regulator
Screw (for regulator)
Air hose
Torque screwdriver
(0.6 N
・
m)
1.
Mounting the Regulator on the Aircraft
Procedure
1.
Temporarily tighten the two screws (for regulator) () on the right side of the aircraft.
Turn the screw about 3 turns by hand.
2.
Insert the regulator bracket () into the screw temporarily fixed in step 1, and fully tighten it with a torque screwdriver.
Tighten the torque driver until it runs idle.
Summary of Contents for DWX-53DC
