DG Flugzeugbau DG 202, Flight Manual

Page: 147 / 212

Seite 43
The next legs can be selected by +/- keys. When the desired leg stat. is displayed the UP/DOWN keys are used to
operate.
XC speed - if two TP’s of the leg were not reached at the same altitude, the average speed is not realistic (especial-
ly by the final glide). XC speed is the value which shows how much you have lost or gained because of that. XC
speed
can be positive or negative.
To zoom the photo sector push ENTER button. The same holds true for the zooming in leg maping. After pushing
ENTER the cross appears in the lower left corner of the display. The +/- keys are used to change its position and
after selecting the segment to be zoomed push ENTER to confirm the selection.
5.6 POS program
The program position informs you about:
number of the GPS satelites that are momentarily tracked
GPS receiver status (2D- or 3D navigation or LAST FIX)
the current position (indication of coordinates)
the altitude (barometic measured by DX 50)
the time (UTC or configurated time in the INIT menu)
Stop watch (as soon as it was started by pushing the START button)
Figure 20: Positions display
To display the date instead of the time the ENTER button has to be pushed. The current date will appear as long the
button is pushed.
The stop watch can be activated by pushing the START button:
START stop watch selection
pushing START again stop watch will start
pushing START again stop watch will stop
GPS status
Number of received satelli-
tes
Latitude
Longitude
Current altitude (ba-
rometric)
Time, date or
stop watch