DG Flugzeugbau DG 202, Flight Manual

Page: 138 / 212

Seite 34
5.3.14 TSK
The selection of the mode of the task start and the radius around the way point inside of which the next leg of the
task is started.
There are two different modes::
Cylinder
Fotosektor
The cylinder radius can be selected (from 0.1 to 9.9 km).
5.3.15 GPS
The GPS receiver operates allways with UTC (before GMT). In this submenu for the time dispaly a time offset can
be entered. Example:
UTC+0: the UTC is shown
UTC+1: the c.e.t. during winter is shown (MEZ= UTC +1 )
UTC+2: the c.e.t. during summer is shown (MESZ= UTC +2 ) etc.
The GPS DATUM is standrdly shown in WGS 1984. This option enables to adapt the coordination system of the
GPS to the Earth. This should not be changed in order to get the right position data.
5.3.16 UNITS
In the submenu UNITS the different forms and units for the fly data presentation can be selected:
Coordinates of the TP’s in dezimal minutes or seconds
DISTANCE: km, nm, ml
SPEED: km/h, kts, mph
Climbing/descending (VER.SPEED): m/s, kts
WIND: km/h, kts, mph, m/s
ALTITUDE: m, ft
WINGLOAD kg/m², lb/ft², OVERLOAD
5.3.17 SYMBOL
In this submenu the glider symbol size can be altered.
5.3.18 AIRSPACE
In the AIRSPACE submenu the airspace info which are shown on the graphic dispaly can be selected:
AIRSPACE: DISABLE/ ENABLE
CTR Zones
R, P, D Zones
TMA Zones
TRA- Zones