DG Flugzeugbau DG 202, Flight Manual

Page: 127 / 212

Seite 23
There are three different possibilities to display the task graphically:
Figure 12: TSK graphic modes
By using thr + or - keys the above mentioned graphic modes can be selected as long as the instrument is in the TSK
mode. The scale of these three graphic modes can not be changed as it is possible in the APT or TP mode.
Either the whole task, the whole active leg or the active pgoto sector can be shown on the display. Es kann entwe-
der die gesamte Aufgabe (TSK), der gesamte aktive Schenkel (LEG), oder der aktive Fotosektor(FS), eingeblendet
werden. The active photo sector means the next sector which will be flown to. The show glider indicates the current
position related to the task.
5.3.1 Selection of a TASK
After selcting the TSK mode with MODE button the TSK menu is activated by pushing ENTER. The option
SELECT should be selected and confirmed with ENTER. With UP and DOWN keys you can browse through all
100 possible tasks. The number of the current task is shown on the display with the programmed way points below.
If points are not programmed within the task the message NOT PROG appers. If you want to activate the displayed
task you have to push the ENTER button. The selected task is now active.
On the glider navigation display the first tuning point (normally designated Nr. 0) will be considered as a start point.
That is normally the starting airfield but can also be a TP out of the airfield.
The information for aproach to the first way point aren’t shown until the start of the task.