DG Flugzeugbau DG 202, Flight Manual, Page: 130 / 212

Seite 26
Select a task in a usual way.
With copy a selected task can be copied or after N (no) edited. The DX 50 task doesn’t consider the TAKE OFF
point as a start point so this should be entered. After pushing ENTER button appears a window with SELECT,
INSERT and DELETE now you can edit the selected task if you want. The same holds true for LANDING.
After pushing ESC the window closes, the task is declared and a message TASK DECLARED appears. During the
flight many different tasks can be selected and flown, but in FAI logger the only active task is the declared task.
If the task is alredy declared the following message appears after the selecting DECLARE:
If the answer is N (no) the previously in logger declared task is displayed and you can return to the TSK menu by
pushing ESC. If the answer is Y (yes) the curent selected task is displayed that means the last declared task has been
altered.
IMPORTANT!
After every landing the task must be declared again although the task stays the same.
The LXFAI program enables you to declare task on your PC. The task should be correctly defined in FLIGHT
INFO menu and then transmited to the DX 50. It is then automatically declared and the TSK DECLARE is not
necessary.
5.3.4 Deletion of a TASK (DELETE)
You can delete a task that has been selected as active before. To delete the whole task select DELETE menu. BY
chosing Y (yes) the deletion process is confirmed, by chosing N (no) the deletion process is terminated.