DG Flugzeugbau DG 202, Flight Manual

Page: 116 / 212

Seite 12
4.2 Graphic display
The graphic display serves as a navigation support in a graphic and alphanumerical form in the APT, TP, und TSK
modes.
The graphic display is second to the navigationt display in the above mentioned modes. The graphic display is cal-
led by pushing the AB button.
The most important data as BRG(B), TRK(T), GS(G) and distance are shown on the right hand side of the disply.
The name of the selected way point appears in the shortened form.
In the gaphic part of the display the current position of the glider is shown in relation to the selected course or to the
selected way point respectively.
The different air space structures are shown all togeather or related to their type fading in or out (see SETUP).
Two different glider symbols are available and are configured in the SETUP program.
Figure 3: Graphic display
If there aren’t enough satelites for the navigation in the lower part of the display the warning GPS BAD is display-
ed.
The ZOOM function (“ +” or “- ” button )
enables you to select the scale from 200 km to 100, 50, 20, 10, 5
and 2 km. The selected scale value is shown in the left bottom corner of the display. In the TASK mode ‘Z’ is
displayed for ZOOM and the TSK, LEG or FS (photo sector) for the presented mode. By pushing the AB button the
belonging navigation display is switched on.
Type selected way point:
APT: airport
TP: turn point
TSK: task
Way point
Airspace structures if
selected in SETUP
Course line Glider symbol
Zoom factor: e.g. 100km means
that the width of the display is
100km
Short name of
the selected way
point
Bearing (BRG)
Distance (DIS)
Track (TRK)
Ground speed
(GS)