DG Flugzeugbau DG 202, Flight Manual

Page: 132 / 212

Seite 28
5.3.5 Flying with a TASK
When using the TSK mode note the following remarks:
The corresponding task must have been programmed and activated.
It is recomanded to perform a task chech before the flight. This can be done by using the TSK subprogram TSK
EDIT. In this program all leg distances, all leg courses and the total distance of the task are calculated and
displayed. Possible coordinate or programming errors of the turning points can now be recognized and corrected
in time.
A programmed task always has to be started manually when passing the start point by holding the START but-
ton at least for a second.
However the instrument switches automatically to the next leg of the task when passing the way point sector.
When flying in the TSK mode it can be quit any time to continue the flight in another mode (e.g. TP, APT, or
Near Airport). However shortly before reaching the way of final point you have to return to the TSK mode be-
cause otherwise the statistic documentatioin is incomplete.
As long as the task is not started the DX 50 dispalys all flight data (course, distance etc.) related to the first entered
point of the task.
5.3.6 Starting of a TASK
The pfhotosector dimesions as also the size of a radius (Start, TP or Finish radius) and thus the dimension of the
coresponding sectors can be selected in the SETUP TSK menu.
Fotosektor
Cylinder
Radius
Figure 13: Rounding modes
To start a task or to chane to the next leg of a task when rounding a way point the START button has to be pushed
in the following manner:
Photosector/Cylinder