3
Award BIOS Setup Utility
45
themselves. Your system supports five modes, 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select the
best available mode after checking your drive.
Auto
The BIOS will automatically set the system according to your
hard disk drives timing.
0-4
You can select a mode that matches your hard disk drives
timing. Caution: Do not use the wrong setting or you will
have drive errors.
IDE Primary Master/Slave UDMA and IDE Secondary Master/Slave
UDMA
These categories allow you to set the Ultra DMA in use. When Auto
is selected, the BIOS will select the best available option after checking
your hard drive or CD-ROM.
Auto
The BIOS will automatically detect the settings for you.
Disabled
The BIOS will not detect these categories.
On-Chip Primary PCI IDE and On-Chip Secondary PCI IDE
These categories allow you to enable or disable the primary and
secondary IDE controller. The default is Enabled. Select Disabled if you
want to add a different hard drive controller.
USB Keyboard Support
By default, USB Keyboard Support is Disabled. However, if you are
using a USB keyboard under DOS, make sure to enable this function.
Init Display First
This field applies only to systems installed with both PCI and AGP
cards. It allows you to select which one to initialize first when the
system boots.
AGP
When the system boots, it will first initialize AGP.
PCI Slot When the system boots, it will first initialize PCI.