2
Hardware Installation
15
2.4 Jumper Settings for Wake-On-Keyboard/
Mouse
Jumper JP3
Wake-on-Keyboard/Mouse
The system board supports the
Wake-On-Keyboard/Mouse function.
This function allows the keyboard/
mouse to power-on the system. By
default, JP3 is set at 1-2 On - Wake-
On-Keyboard/Mouse disabled.
Keyboard/Mouse Power On in the
Integrated Peripherals setup of the
Award BIOS must be set accordingly.
Refer to Chapter 3 for details.
2-3 On: Enable
1-2 On: Disable (default)
Warning:
1. If JP3 was previously enabled with a password set in the
BIOS setup, and now you wish to disable the Wake-On-
Keyboard function, make sure to disable the password in
the BIOS setup prior to setting JP3 to disabled. You will
not be able to boot up the system if you fail to do so.
2. The power button will not function once a keyboard
password has been set in the KB Power On Password
field of the Integrated Peripherals setup. You must type
the correct password to power-on the
system.
3. The 5VSB power source of your power supply must
support
≥
720mA (minimum).
