DFI P2XBL/E, User Manual

Page: 47 / 59

3
Award BIOS Setup Utility
47
Onboard Parallel Port
378/IRQ7, 3BC/IRQ7, 278/IRQ5 Selects the I/O address and IRQ
for the onboard parallel port.
Disabled Disables the onboard parallel port.
Parallel Port Mode, ECP Mode Use DMA and EPP Mode Select
Parallel Port Mode will appear only if you selected an I/O address and
IRQ in the Onboard Parallel Port field. This option applies to a
standard specification and will depend on the type and speed of your
device. Refer to your peripheral’s manual for the best option. Select the
parallel port mode according to the type of printer device connected
to your onboard parallel port.
The parallel modes are SPP, EPP, ECP and ECP+EPP. The default is
ECP+EPP. Both “ECP Mode Use DMA” and “EPP Mode Select” will
appear on the screen. If you selected EPP, “EPP Mode Select” will
appear. This field applies to standard specification. The options are
EPP1.9 and EPP1.7. Default setting: EPP1.7. If you selected ECP, “ECP
Mode Use DMA” will appear. This is used to select a DMA channel
for the parallel port. The options are 1 and 3. Default setting: 3.
Keyboard/Mouse Power On
This field allows you to use the keyboard or mouse to power-on the
system. To use this function, make sure JP3 is set to 2-3 On - the
Wake-On-Keyboard/Mouse function enabled. Refer to “Jumper Settings
for Wake-On-Keyboard/Wake-On-Mouse” in Chapter 2 of this manual
for more information.
Disabled Default setting.
Warning:
If JP3 was previously enabled with a password
set in this field, and now you wish to disable the
“password” function, make sure to set this field
to Disabled prior to setting JP3 to 1-2 On -
Disabled, otherwise you will not be able to boot
up the system.
Password When this option is selected, the “KB Power On
Password” field will appear. Move the cursor to this
field and press <Enter>. Enter your password. You can