Obdstar X300 DP, User Manual

Page: 1 / 46

OBDSTAR
User manaul
Model: X300 DP
Brand: OBDSTAR
Safety Precautions
Before using Key Master DP, please read the following safety information carefully.
1
、
Never collide, throw, or punch Key Master DP, and avoid falling, extruding and blending it.
2
、
Do not use Key Master DP in exceptionally cold or hot, dusty, damp or dry environments.
3
、
In places where Key Master DP is forbidden or using Key Master DP may cause interference or
generate a potential risk, please turn off it.
4
、
To ensure a safe driving, please do not use Key Master DP while driving.
5
、
Turn off Key Master DP before boarding any airplane.
6
、
Never place Key Master DP into apparatus with strong electromagnetic field.
7
、
Do not dismantle Key Master DP by yourself. If there is any inquiry, please contact the dealer.
8
、
Keep Key Master DP far away from magnetic devices because its radiations may erase the data
stored on the devices.
10
、
Do not use Key Master DP in high temperature and other environment with flammable gas,
such as gas station.
11
、
Store Key Master DP out of reach of children and do not allow children to use it unsupervised.
12
、
Please use the included battery and charger. Otherwise, explosion may happen.
13
、
Adhere to laws and regulation, respect people’s privacy and legal rights, during operating Key
Master DP.
14
、
Follow the instructions strictly when using USB cable, otherwise, it will damage your Key
Master DP and PC.
Precautions on Using Key Master DP
●The ignition switch should be OFF while plugging or unplugging the diagnostic connector.
●Do not disconnect the vehicle inner consumer when the ignition switch is on. High voltage
transients may encounter at the moment of disconnecting, which may damage the sensors and
the ECU.
● Keep the computer from magnetic object.
● Do cut off the power supply of ECU system before welding on the vehicle.
● Pay more attention to the ECU and the sensors when the operation is next to them.
● Ground yourself when you disassemble PROM, otherwise ECU and sensors will be damaged by
static electricity.
● Do connect ECU harness connector firmly, otherwise electronic elements, such as IC inside ECU,
will be damaged.